|
|
Certifications
ISO 9001: 2000
RWTUV had approved Newmans for NEWCO and OIC in Design, Manufacture, Sales and Service of Industrial Valves under Certificate Registration Number # 05-1026
For more info regarding Newco Valves' Quality/Management System,
contact: mpocol@newmansvalve.com
Back to Top
American Society of Mechanical Engineers
| Standard Number |
|
Standard Name |
| |
|
|
| ASME CODE (1997 ADDENDA) | | BOILER AND PRESSURE VESSEL CODE |
| ASME A13.1 (1996) | | SCHEME FOR THE IDENTIFICATION OF PIPING SYSTEMS |
| ASME B1.1 (2003) | | UNIFIED INCH SCREW THREADS, UN AND UNR THREAD FORM |
| ASME B1.5 (1997) | | ACME SCREW THREADS |
| ASME B1.7M (1984) | | NOMENCLATURE, DEFINITIONS, AND LETTER SYMBOLS FOR SCREW THREADS |
| ASME B1.8 (1988) | | STUB ACME SCREW THREADS |
| ASME B1.12 (1987) | | CLASS 5 INTERFERENCE - FIT THREAD |
| ASME B1.20.1 (1983) | | PIPE THREADS, GENERAL PURPOSE, INCH |
| ASME B1.20.3 (1976) | | DRY-SEAL PIPE THREADS, INCH |
| ANSI/ASME B16.1 (1998) | | CAST IRON PIPE FLANGES AND FLANGED FITTINGS |
| ANSI/ASME B16.5 (2003) | | PIPE FLANGES AND FLANGED FITTINGS: NPS 1/2 THROUGH 24 |
| ASME B16.9 (2003) | | FACTORY MADE WROUGHT STEEL BUTTWELDING FITTINGS |
| ANSI/ASME B16.10 (2002) | | FACE-TO-FACE AND END-TO-END DIMENSIONS OF VALVES |
| ASME B16.11 (2001) | | FORGED FITTINGS, SOCKET WELDING & THREADED |
| ASME B16.20 (1998) | | METALLIC GASKETS FOR PIPE FLANGES: RING JOINT SPIRAL WOUND AND JACKETED |
| ASME B16.21 (2005) | | NON-METALLIC FLAT GASKETS FOR PIPE FLANGES |
| ASME B16.25 (2003) | | BUTTWELDING ENDS |
| ANSI/ASME B16.33 (2002) | | MANUALLY OPERATED METALLIC GAS VALVES FOR USE IN GAS PIPING SYSTEMS UP TO 125 PSI ( SIZES NPS 1/2-NPS 2 ) |
| ANSI/ASME B31.1 (2004) | | POWER PIPING |
| ANSI/ASME B31.3 (2004) | | PROCESS PIPING |
| ANSI/ASME B16.34 (2004) | | VALVES FLANGED, THREADED AND WELDING END |
| ANSI/ASME B16.36 (1996) | | ORIFICE FLANGES |
| ANSI/ASME B16.38 (1985) | | LARGE METALLIC VALVES FOR GAS DISTRIBUTION (MANUALLY OPERATED, NPS 2-1/2 to 12, 125 psig MAXIMUM) |
| ANSI/ASME B16.42 (1998) | | DUCTILE IRON PIPE FLANGES AND FLANGED FITTINGS: CLASSES 150 AND 300 |
| ANSI/ASME B16.47 (1996) | | LARGE DIAMETER STEEL FLANGES |
| ANSI B17.1 (1967, R' 89) | | KEYS AND KEYSEATS |
| ANSI B18.2.2 (1987) | | SQUARE AND HEX NUTS |
| ASME B31.4 (2002) | | PIPELINE TRANSPORTATION SYSTEMS FOR LIQUID HYDROCARBONS AND OTHER AMMONIA & ALCOHOLS |
| ANSI/ASME B31.8 (2003) | | GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS |
| ANSI/ASME B36.10 (2004) | | WELDED & SEAMLESS WROUGHT STEEL PIPE |
| ANSI/ASME B36.19 (2004) | | STAINLESS STEEL PIPE |
| ANSI FCI-2 (1991) | | CONTROL VALVE SEAT LEAKAGE |
Back to Top
American Petroleum Institute
| Standard Number |
|
Standard Name |
| |
|
|
| API RP 574 (1998) | | INSPECTION PRACTICES FOR PIPING SYSTEM COMPONENTS |
| API 589 (1998) | | FIRE TEST FOR EVALUATION OF VALVE STEM PACKING |
| API RP 591 (2003) | | PROCESS VALVE QUALIFCATION PROCEDURE |
| API 594 (2004) | | CHECK VALVES-FLANGED, LUG, WAFER AND BUTTWELDING |
| API 597 (1981) | | STEEL VENTURI GATE VALVES, FLANGED, BUTTWELDING ENDS |
| API 598 (2004) | | VALVE INSPECTION AND TESTING |
| API 599 (2002) | | METAL PLUG VALVES - FLANGED, WELDING ENDS |
| API 601 (1988) | | METALLIC GASKETS FOR RAISED-FACE PIPE FLANGES AND FLANGED CONNECTIONS (DOUBLE-JACKETED CORRUGATED AND SPIRAL WOUND) |
| API 600 (2001) | | "BOLTED BONNET STEEL GATE VALVES FOR PETROLEUM AND NATURAL AS INDUSTRIES ""ISO ADOPTION FROM ISO 10434""" |
| API 602 (2005) | | STEEL GATE, GLOBE AND CHECK VALVES FOR SIZES DN100 AND SMALLER FOR THE PETROLEUM AND NATURAL GAS INDUSTIRIES |
| API 603 (2001) | | CORROSION-RESISTANT, BOLTED BONNET GATE VALVES-FLANGED AND BUTT-WELDINGS ENDS |
| API 604 (1981) | | DUCTILE IRON GATE VALVES, FLANGED ENDS |
| API 605 (1988) | | LARGE-DIAMETER CARBON STEEL FLANGES (NOMINAL PIPE SIZES 26 THROUGH 60,CLASSES 75,150,300,400,600, AND 900 (REPLACED BY ANSI/ASME B16.47) |
| API 606 (1989) | | "COMPACT STEEL GATE VALVES, EXTENDED BODY (INCLUDED IN API 602) FIRE TEST FOR SOFT-SEATED QUARTER-TURN VALVES ""ISO ADOPTION FROM ISO 10497-5 2004""" |
| API 607 (2005) | | "FIRE TEST FOR SOFT-SEATED QUARTER-TURN VALVES ""ISO ADOPTION FROM ISO 10497-5 2004""" |
| API 608 (2002) | | METAL BALL VALVES, FLANGED, THREADED, AND WELDING ENDS |
| API 609 (2004) | | BUTTERFLY VALVES-DOUBLE FLANGED, LUG-AND WAFER-TYPE |
| API RP 941 (2004) | | STEEL FOR HYDROGEN SERVICE AT ELEVATED TEMPERATURES AND PRESSURES IN PETROLEUM REFINERIES AND PETROCHEMICAL PLANTS PLANTS |
| API RP 520 (2000), Part 1 | | SIZING, SELECTION AND INSTALLATION OF PRESSURE RELIEVING DEVICES IN REFINERIES |
| API RP 520 (2003), Part 2 | | SIZING, SELECTION AND INSTALLATION OF PRESSURE RELIEVING DEVICES IN REFINERIES DEVICES IN REFINERIES |
| API SPEC 6A (2005) | | SPECIFICATION FOR WELLHEAD AND CHRISTMAS TREE EQUIPMENT |
| API SPEC 6D (2005) | | SPECIFICATIONS FOR PIPELINE VALVES |
| API SPEC 14D (1994) | | SPECIFICATIONS FOR WELLHEAD SURFACE SAFETY VALVES AND UNDERWATER SAFETY VALVES FOR OFFSHORE SERVICE |
| API 5B (2004) | | THREADING, GAUGING THREAD INSPECTION OF CORING, TUBING & LINE PIPE THREADS |
| API 6AM (2003) | | MATERIAL TOUGHNESS |
| API 6FA (1999) | | FIRE TEST FOR VALVES |
| API 6FC (1999) | | FIRE TEST FOR VALVES WITH BACKSEATS |
| API 6FD (1995) | | SPECIFICATION FOR FIRE TEST FOR CHECK VALVES |
| API Q1 (2003) | | SPECIFICATION FOR QUALITY PROGRAMS FOR THE PETROLEUM, PETROCHEMICAL AND NATURAL GAS |
Back to Top
British Standards Institute (For reference only)
| Standard Number |
|
Standard Name |
| |
|
|
| BS 1414 (1975, R' 91) | | GATE, WEDGE & DOUBLE DISK VALVES: STEEL |
| BS 1868 (1975, R' 91) | | CHECK VALVES: STEEL |
| BS 1873 (1975, R' 91) | | GLOBE AND CHECK VALVES: STEEL |
| BS 2080 (1989) OBSOLETE | | FLANGED AND BUTTWELD-END STEEL VALVES |
| BS 5146 | | (WITHDRAWN) REPLACED BY BS 6755 P.1 STEEL VALVES TESTING (1986) AND BS 6755 P.2 (1984) |
| BS 5152 (1974, R' 91) | | GLOBE AND CHECK: CAST IRON |
| BS 5153 (1974, R' 91) | | CHECK: CAST IRON |
| BS 5159 (1974, R' 91) | | BALL: CAST IRON & CARBON STEEL |
| BS 5160 (1974, R' 91) | | GLOBE AND CHECK: STEEL |
| BS 5163 (1986, R' 91) | | GATE, WEDGE & DOUBLE DISK: CAST IRON |
| BS 5351 (1986, R' 91) | | BALL: STEEL |
| BS 5352 (1986, R' 91) | | GLOBE & CHECK: STEEL |
| BS 5418 | | (WITHDRAWN) REPLACED BY BS EN 19 (1992) MARKING: GENERAL PURPOSE INDUSTRIAL |
| BS 5840 (1980, R' 91) | | VALVE MATING DETAILS FOR ACTUATOR OPERATION |
| BS 6364 (1984, R' 91) | | CRYOGENIC |
| BS 6683 (1985, R' 91) | | GUIDE: INSTALLATION AND USE OF VALVES |
| BS 6755: PART 1 (1986, R' 91) | | SPECIFICATION FOR PORDUCTION PRESSURE TESTING REQUIREMENTS |
| BS 6755: PART 2 (1987) | | SPECIFICATION FOR FIRE TYPE-TESTING REQUIREMENTS |
| BS EN 19 (1992) | | MARKING OF GENERAL PURPOSE INDUSTRIAL VALVES. |
Back to Top
International Organization For Standardization
| Standard Number |
|
Standard Name |
| |
|
|
| ISO 5211/1 (2001) | | INDUSTRIAL VALVES- PART-TURN ACTUATOR ATTACHMENTS |
| ISO 5211/2 (2001) | | PART-TURN VALVE ACTUATOR ATTACHMENT-FLANGE AND COUPLING PERFORMANCE CHARACTERISTICS |
| ISO 5211/3 (2001) | | PART-TURN VALVE ACTUATOR ATTACHMENT-DIMENSIONS OF DRIVING COMPONENTS |
| ISO 5752 (1982) | | METAL VALVES FOR USE IN FLANGED PIPE SYSTEMS FACE-TO-FACE AND CENTRE-TO-FACE DIMENSIONS. |
| ISO 9000 (2005) | | QUALITY MANAGEMENT SYSTEMS AND FUNDIMENTALS AND VACABULARY |
| ISO 10012-1 (1992) | | QUALITY ASSURANCE REQUIREMENTS FOR MEASURING EQUIPMENT |
Back to Top
Manufacturers Standard Society
| Standard Number |
|
Standard Name |
| |
|
|
| SP-6 (2001) | | STANDARD FINISHES FOR CONTACT FACES OF PIPE FLANGES AND CONNECTING- END FLANGES OF VALVES AND FITTINGS |
| SP-9 (R2005) | | SPOT FACING FOR BRONZE, IRON AND STEEL FLANGES |
| SP-25 (1998) | | STANDARD MARKING SYSTEM FOR VALVES, FITTINGS, FLANGES AND UNIONS |
| SP-42 (2004) | | CLASS 150 CORROSION RESISTANT GATE, GLOBE ANGLE AND CHECK VALVES WITH FLANGED AND BUTT WELD ENDS |
| SP-44 (2001) | | STEEL PIPELINE FLANGES |
| SP-45 (2003) | | BYPASS AND DRAIN CONNECTIONS |
| SP-51 (2003) | | CLASS 150LW CORROSION RESISTANT CAST FLANGES AND FLANGED FITTINGS |
| SP-53 (2002) | | QUALITY STANDARD FOR STEEL CASTINGS AND FORGINGS FOR VALVES, FLANGES, AND FITTINGS AND OTHER PIPING COMPONENTS: MAGNETIC PARTICLE EXAM METHOD |
| SP-54 (2002) | | QUALITY STANDARD FOR STEEL CASTINGS FOR VALVES, FLANGES, AND FITTINGS AND OTHER PIPING COMPONENTS: RADIOGRAPHIC EXAMINATION METHOD |
| SP-55 (2001) | | QUALITY STANDARD FOR STEEL CASTINGS FOR VALVES, FLANGES OTHER PIPING COMPONENTS-VISUAL METHOD FOR EVALUATION OF SURFACE IRREGULARITIES |
| SP-60 (2004) | | CONNECTING FLANGE JOINT BETWEEN TAPPING SLEEVES AND TAPPING VALVES |
| SP-61 (2003) | | PRESSURE TESTING OF STEEL VALVES |
| SP-65 (2004) | | HIGH PRESSURE CHEMICAL INDUSTRY FLANGES AND THREADED STUBS FOR USE WITH LENS GASKETS |
| SP-67 (2000A) | | BUTTERFLY VALVES |
| SP-69 (2003) | | ANSI/MSS EDITION PIPE HANGERS AND SUPPORTS, SELECTION AND APPLICATION |
| SP-70 (1998) | | CAST IRON GATE VALVES, FLANGED AND THREADED ENDS |
| SP-71 (1997) | | GRAY IRON SWING CHECK VALVES, FLANGED AND THREADED ENDS |
| SP-72 (1999) | | BALL VALVES WITH FLANGED OR BUTT-WELDING ENDS FOR GENERAL SERVICE |
| SP-79 (2004) | | SOCKET-WELDING REDUCER INSERTS |
| SP-81 (2001) | | STAINLESS STEEL, BONNETLESS, FLANGED KNIFE GATE VALVES |
| SP-82 (1992) | | VALVE PRESSURE TESTING METHODS |
| SP-84 (1990) | | VALVES - SOCKET WELDING AND THREADED ENDS |
| SP-85 (2002) | | CAST IRON GLOBE AND ANGLE VALVES, FLANGED AND THREADED ENDS |
| SP-86 (2002) | | GUIDELINES FOR METRIC DATA IN STANDARDS FOR VAVES, FLANGES, FITTINGS AND ACTUATORS |
| SP-88 (R2001) | | DIAPHRAGM VALVES |
| SP-91 (1992) | | GUIDELINES FOR MANUAL OPERATION OF VALVES |
| SP-92 (1999) | | MSS VALVE USER GUIDE |
| SP-93 (R2004) | | QUALITY STANDARD FOR STEEL CASTINGS AND FORGINNGS FOR VALVES, FLANGES AND FITTINGS AND OTHER PIPING COMPONENTS- LIQUID PENETRANT EXAM METHOD |
| SP-94 (R2004) | | QUALITY STANDARD FOR FERRITIC AND MARTENSITIC STEEL CASTINGS FOR VALVES, FLANGES, AND FITTINGS & OTHERS PIPING COMPONENTS- ULTRASONIC EXAM METHOD |
| SP-96 (R2005) | | GUIDELINES ON TERMINOLOGY FOR VALVES AND FITTINGS |
| SP-98 (2001) | | PROTECTIVE COATINGS FOR THE INTERIOR OF VALVES, HYDRANTS AND FITTINGS |
| SP-99 (R2005) | | INSTRUMENT VALVES |
| SP-101 (R2001) | | PART-TURN VALVE ACTUATOR ATTACHMENT- FLANGE AND DRIVING COMPONENT DIMENSIONS AND PERFORMANCE CHARACTERISTICS |
| SP-102 (R2001) | | MULTI-TURN VALVE ACTUATOR ATTACHEMENT: FLANGE & DRIVING COMPONENT DIMENSIONS & PERFORMANCE CHARACTERISTICS |
| SP-110 (1996) | | BALL VALVES THREADED, SOCKET-WELDING, SOLDER JOINT, GROOVED AND FLARED ENDS |
| SP-117 (2002) | | BELLOWS SEALS FOR GLOBE AND GATE VALVES |
| SP-118 (2002) | | COMPACT STEEL GLOBE AND CHECK VALVES-FLANGED,FLANGELESS, THREADED AND WELDING ENDS (CHEMICAL AND PETROLEUM REFINERY SERVICE) |
| SP-120 (2002) | | FLEXIBLE GRAPHITE PACKING SYSTEM FOR RISING STEM STEEL VALVES (DESIGN REQUIREMENTS) |
| SP-121 (R2002) | | QUALIFICATION TESTING METHODS FOR STEM PACKING FOR RISING STEM STEEL VALVES |
| MR0175 (2005) | | SULFIDE STRESS CRACKING RESISTANT METALLIC MATERIALS FOR OILFIELD EQUIPMENT |
| MR0103 (2005) | | MATERIALS RESISTANT TO SULFIDE STREET CRACKING IN CORROSIVE PETROLEUM REFINING ENVIROMENTS |
Back to Top
American Society Non-Destructive Test
| Standard Number |
|
Standard Name |
| |
|
|
| ASNT-TC-1A (1996) | | RECOMMENDED PRACTICE NO. SNT-TC-1A 1996 |
Back to Top
Canadian Standards Association
| Standard Number |
|
Standard Name |
| |
|
|
| B51-97 | | BOILER, PRESSURE VESSEL, AND PRESSURE PIPING CODE |
| Z245.15-96 | | STEEL VALVES |
| CAN3-Z299.4-85 (REAFFIRMED 1997) | | QUALITY ASSURANCE PROGRAM - CATEGORY 4 |
| CAN3-Z299.3-85 (REAFFIRMED 1997) | | QUALITY ASSURANCE PROGRAM - CATEGORY 3 |
Back to Top
|
Certifications
